RMC-111FB-SS — 1x 10/100TX (RJ-45) to 1x 100FX (Signle Mode / SC).
Серия RMC-111 представляет собой промышленную версию для монтажа в стойку. Ethernet-конвертер для волоконно-оптических носителей для стойки в стойке корпуса RMC-1000, которая поддерживает «горячую» замену и легкую установку в RMC-1000.
Спецификация
| Specifications |
| ORing Card-Type Media Converter Model |
RMC-111FB-MM |
RMC-111FB-SS |
RMC-111PB |
| Physical Ports |
|
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
1 |
1 |
| Fiber Ports Number |
1 |
1 |
— |
| Fiber Ports Standard |
100Base-FX |
100Base-FX |
— |
| Fiber Mode |
Multi-mode |
Single-mode |
— |
| Fiber Diameter (μm) |
62.5/125 μm
50/125 μm |
9/125 μm |
— |
| Fiber Optical Connector |
SC |
SC |
— |
| Fiber Ports Specifications Typical Distance (km) |
2 km |
30 km |
— |
| Wavelength (nm) |
1310 nm |
1310 nm |
— |
| Max. Output Optical Power (dBm) |
-14 dBm |
-8 dBm |
— |
| Min. Output Optical Power (dBm) |
-23.5 dBm |
-15 dBm |
— |
| Max. Input Optical Power(Saturation) |
0 dBm |
0 dBm |
— |
| Min. Input Optical Power (Sensitivity) |
-31 dBm |
-34 dBm |
— |
| Link Budget (dB) |
7.5 dB |
19dB |
— |
| 100Base-FX SFP port |
— |
— |
1 |
| Technology |
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control |
| Processing |
Store-and-Forward |
| DIP-Switch setting |
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex |
| LED Indicators |
|
| Power / Indicator |
Green : Power LED x 1 |
| 10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act
Amber for 100Mbps indicator
Green for port duplex indicator |
| 100Base-FX fiber port indicator |
Green for fiber port Link/Act — (ON) Link up / (Blinking) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
| LFP statue indicator |
Amber for link fault detected and passed |
| Power |
|
| Power consumption (Typ.) |
2.2 Watts |
| Reverse Polarity Protection |
Present |
| Physical Characteristics |
|
| Dimensions (W x D x H) |
21.8 (W) x 73.1 (D) x 126 (H) mm |
| Weight (g) |
145 g |
140 g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 60°C (14 to 140°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
