IIoT шлюз промышленного класса AMIT IOG700AM-0T402

Производитель: AMIT

Артикул: IOG700AM-0T402

Цена: 908,52 руб. с НДС

Артикул : IOG700AM-0T402

IOG700AM-0T402 — LTE Dual SIM, 2x RJ45 FE, 4x RS232/RS485, 8GB-uSD Log Storage, DC 9-36V.


IIoT Telemetry with Multi-Serial

IOG700-0x402 is cellular based remote terminal unit (RTU) for IIoT telemetry of SCADA system. With Cellular WAN, it is non-geographic limit and can install at instant. With two Ethernet, it can connect to two network devices. It can also configure one port as fail over Ether-WAN for reliable dual-WAN scenario. With multiple serial interfaces, it can connect to more legacy serial devices. Embedded storage based data logging function can store serial data for non-broken or scheduling transfer. Smart event handling allow remote management and can initiate event to trigger action.

Reliable and Secure Transfer

Besides Cellular WAN, there is also configurable Ether-WAN for fail-over function. It can guarantee reliable transfer. Capable of various VPN technologies, it can build tunnel with famous VPN server for scenario requirement. Built in both IPv4/IPv6 and routing protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Easy setting. Friendly setting with Web UI for basic, CLI and Script window for advance requirement. Built-in TR-069 can work with AMIT-NMS and SNMP work with popular network tools for multi-site management.

Intelligent Protocol Conversion

Built-in both Ethernet and multi-serial interfaces, it can connect not only IP based equipment but more various types of legacy serial devices. This RTU is fully function Modbus gateway to connect SCADA server and remote machine to perform intelligent protocol conversion between Modbus/TCP and Modbus/RTU/ASCII. It can also be slave when SCADA server do configuration or Modbus master to access device when perform data logging function.

Multi-Serial Data Logging

There are four serial interfaces for IIoT telemetry requirement. It is helpful for administrators further data analysis and statistics to record all Modbus data transaction no matter when connection online or broken. Multi-mode data logging function can record all Modbus data for various scenarios. All files can be download by FTP or setting at Web UI. With this function can achieve non-broken and scheduling transfer.

Smart Event Handling

According to pre-defined rule lists, Administrator can change RTU setting or trigger event action remotely by SMS, SNMP trap. When there is new input or behavior change of RTU, it will be new event to trigger action, and also can notify administrator or related devices by SMS or SNMP traps. It will be useful function to work as automatic process when setting one event to trigger consecutive events for special purpose within RTU or more remote devices.


Device Interface

  • 4G Module: 1*LTE, 2*Micro-SIM (3FF)
  • Ethernet: 2*RJ45 FE
  • Field Bus: 4*RS232/485 (Terminal Block)
  • Log Storage: 1*8GB-uSD
  • Power Input : 1*DC 9V ~ 36V (Terminal Block)
  • Antenna Con.: 2*SMA (F)-4G

WAN and Uplink

  • WAN: Cellular and Config. Ether-WANFailover
  • Cellular: 3GPP, 2G/3G/4G, IP Pass-through, IPv4/6
  • Ether-WAN: Dynamic IP, Static IP, PPPoE , PPTP, L2TP
  • Network Monitor: ICMP/DNS Query


  • LAN and VLAN: DHCP Server/Relay , Port/Tag based VLAN
  • IPv6: Dual Stack, Static IPv6, DHCPv6, PPPoEv6
  • Port Forward: NAT 1-1, 1-many, tansversal, DMZ, Virtual Server and Computer, VPN Pass-through
  • Routing: Static, Dynamic — RIP1/RIP2, OSPF, BGP

Field Comm.

  • Virtual COM: RFC2217, TCP Client, TCP Server, UDP
  • Modbus: Gateway for Modbus TCP/RTU/ASCII Master/Slave Access;

Slave for Device Status/Information Access

  • Data Logging: Sniffer, Off-line / Full-time Proxy, mixed modes


  • Scheduling: Time Schedule List
  • Grouping: Host Grouping List
  • Ext. Server: Email, Syslog, RADIUS, SCEP, FTP, DDNS, IGMP
  • Certificate: My Certificate, Trusted Certificate, Issue Certificate


  • Cellular Toolkit: Data Usage, SMS, SIM PIN, USSD, Network Scan
  • Event Handling: User Defined Manage/Notify Event; Action and Trigger by SMS, Mail, Syslog, SNMP Trap, Modbus


  • VPN Tunneling: IPSec, OpenVPN, PPTP, L2TP, GRE
  • Scenario: Site/Host to Site/host; Hub and Spoke; Dynamic VPN
  • VPN Capability: IPSec: up to 16 tunnels
  • Firewall: SPI Firewall with Stealth Mode, IPS
  • Access Control: Packet Filter, MAC Filter


  • Configuration: Web UI, CLI, Command Script
  • Management: SNMPv3 Std. and AMIT MIB, TR069
  • System: Upgrade, Backup and Restore, Reboot and Reset, SysLog
  • FTP: FTP Server, User Account
  • Diagnostic: Packet Analyzer, Diagnostic Tools


  • OP/Storage Temp.: -30C ~ 70C ; -40C ~ 85C
  • Humidity: 10%~95% (non-condensing)
  • Enclosure: Metal, DIN-Rail, Bracket (Optional)
  • Dimension: 31x 99 x131mm (w/o mounting kit)

31x108x131mm (with DIN Rail kit)

Certificate — CE

  • Standards and Regulation
  • EMI: EN 55032: 2015 +AC: 2016 Class B
  • EMS: EN 55024, IEC 61000,
  • Radio: EN 301 489, EN 300 328 ,EN 301 893, EN50385
  • Safety: EN 60950-1

Package Accessory

  • 1*Device
  • 2*Cellular Antenna (3dBi)
  • 1*Power Adapter DC 12V/1A
  • 1*RJ45 Cable
  • 1*Terminal Block (2-pin for DC Power)
  • 1*Terminal Block (12-pin for Serial)
  • 1*DIN Rail Kit, 1*Screw Bag
  • 4*Rubber feet, 1*CD (User Manual)

Для запроса счёта или коммерческого предложения заполните форму ниже и наш специалист ответит вам в ближайшее время

Ваше имя:*
Контактный телефон:
Контактный e-mail:
Требуемые позиции и комментарии:
Реквизиты в формате .pdf/.doc/.txt/.jpg: