IIoT шлюз промышленного класса AMIT IOG500AM-0T001

Производитель: AMIT

Артикул: IOG500AM-0T001

Артикул : IOG500AM-0T001

IOG500AM-0T001 — LTE Dual SIM, 1xFE, 1xRS232/RS485 Modbus TCP/RTU/ASCII, DC 5-18V.

Описание:

Location Free Telemetry at Instant

IOG500-0T001 is 4G based remote terminal unit (RTU) for machine telemetry of SCADA system. With both Ethernet and serial interfaces, It can connect to both IP based network equipment and legacy serial device. With Cellular WAN, it is non-geographic limit and can install at instant. Three are rich functions capable of performing Intelligent protocol conversion and secure data transfer. Data logging function can store field devices data for non-broken or scheduling transfer. Smart event handling allow administrator to manage system or initiate event to trigger action remotely. It can also action and notify staff when system status change.

Secure Transfer

To achieve secure transfer inside SCADA system, there are rich protocol inside RTU. Built in both IPv4/IPv6 and routing protocol are compatible with most ISP network. Cellular toolkit simplifies setting, utilizes ISP service and monitoring data usage. Capable of various VPN technologies, it can build tunnel with famous VPN server for scenario requirement. Friendly setting with Web UI for basic, CLI and Script window for advance requirement. Built-inTR-069 can work with AMIT-NMS and SNMP work with popular network tools for multi-site management.

Intelligent Protocol Conversion

Built-in both Ethernet and serial interface, it can connect not only IP based equipment but also acquired legacy serial devices. It is Modbus gateway connect remote device and SCADA server to perform intelligent protocol conversion between Modbus TCP, RTU and ASCII. It can play role as Modbus master to access device when perform data logging. It can work as slave when SCADA server uses Modbus command to configure.

Smart Event Handling

According to pre-defined rule lists, Administrator can change RTU setting or trigger event action remotely by SMS, SNMP trap. When there is new input or behavior change of RTU, it will be new event to trigger action, and also can notify administrator or related devices by SMS or SNMP traps. It will be useful function to work as automatic process when setting one event to trigger consecutive events for special purpose within RTU or more remote devices.

Спецификация

Device Interface

  • 4G Module: 1*LTE Cat.4, 2*Micro-SIM (3FF), with GNSS
  • Ethernet: 1*RJ45 FE
  • Field Bus: 1*RJ45 RS232/485
  • Power Input : 1* DC 9V ~ 32V (Terminal Block)
  • Antenna Con.: 2*SMA (F)-4G , 1* SMA(F)-GNSS

WAN and Uplink

  • WAN: Cellular
  • Cellular: 3GPP, 3G/4G, IP Pass-through
  • Network Monitor: ICMP/DNS Query

Protocol

  • LAN and VLAN: DHCP Server/Relay
  • Port Forward: NAT 1-1, 1-many, tansversal, DMZ, Virtual Server and Computer, VPN Pass-through
  • Routing: Static, Dynamic — RIP1/RIP2, OSPF, BGP

Field Comm.

  • Virtual COM: RFC2217, TCP Client, TCP Server, UDP
  • Modbus: Gateway for Modbus TCP/RTU/ASCII Master/Slave Access;

Slave for Device Status/Information Access

Object

  • Scheduling: Time Schedule List
  • Grouping: Host Grouping List
  • Ext. Server: Email, Syslog, RADIUS, SCEP, DDNS, IGMP
  • Certificate: My Certificate, Trusted Certificate, Issue Certificate

Security

  • VPN Tunneling: IPSec, OpenVPN, PPTP, L2TP, GRE
  • Scenario: Site/Host to Site/host; Hub and Spoke; Dynamic VPN
  • VPN Capability: IPSec: up to 3 tunnels
  • Firewall: SPI Firewall with Stealth Mode, IPS
  • Access Control: Packet Filter, MAC Filter

Administration

  • Configuration: Web UI, CLI, Command Script
  • Management: SNMPv3 Std. and AMIT MIB, TR069
  • System: Upgrade, Backup and Restore, Reboot and Reset, SysLog
  • Diagnostic: Diagnostic Tools

Service

  • Cellular Toolkit: Data Usage, SMS, SIM PIN, USSD, Network Scan
  • Event Handling: User Defined Manage/Notify Event; Action and Trigger by SMS, Mail, Syslog, SNMP Trap, Modbus
  • GNSS: GPS Location Tracking

Environment

  • OP/Storage Temp.: -30C ~ 70C ; -40C ~ 85C
  • Humidity: 10%~95% (non-condensing)
  • Enclosure: Metal, Bracket, DIN-Rail
  • Dimension: 93x90x27mm (with mounting brackets)

Certificate — CE

  • Standards and Regulation
  • EMI: EN 55032: 2015 +AC: 2016 Class B
  • EMS: EN 55024, IEC 61000
  • Radio: EN 301 489, EN 300 328, EN 301 893, EN50385
  • Safety: EN 60950-1

Package Accessory

  • 1*Device
  • 2*Cellular Antenna (3dBi)
  • 1*Power Adapter DC 12V/1A
  • 1*RJ45 Cable, 1*Serial Convert Cable
  • 1*Terminal Block (2-pin for DC Power)
  • 1*DIN Rail Kit, 1*Screw Bag
  • 4* Rubber feet, 1*CD (User Manual)

Остались вопросы или хотите узнать цену?

Заполните форму ниже и наш специалист свяжется с вами в ближайшее время

Ваше имя:*
Ваш номер телефона:
Ваш e-mail:
Ваш вопрос или комментарий: